2019 Audi S4 — car pulls right even though alignment is green
Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressures match. Would you cross-rotate tires to check radial pu…
Repair & Ownership
Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressures match. Would you cross-rotate tires to check radial pu…
This started as a small annoyance and I finally decided to track it down. 2006 Mazda RX-8 Sport, about 110,000 miles. There is one front-end clunk over pothole…
Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressures match. Would you cross-rotate tires to check radial pu…
2024 Ram 1500 Limited, about 8,200 miles. There is a single clunk from the front over small potholes and driveway edges. Big smooth bumps don't reproduce it. E…
2013 Infiniti G37 xS, about 101,000 miles. Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressures match. Woul…
This started as a small annoyance and I finally decided to track it down. 2013 Toyota Prius Three, about 136,000 miles. Shocks were replaced and there are no o…
2021 Audi A6 Prestige, about 17,500 miles. Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressures match. Woul…
2023 Audi S5 Sportback, about 55,000 miles. Shocks were replaced and there are no obvious loose parts, but the rear still feels vague over highway undulations.…
Shocks were replaced and there are no obvious loose parts, but the rear still feels vague over highway undulations. What alignment, bushing, tire or installati…
2025 Hyundai Tucson Hybrid Limited, about 22,000 miles. Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressure…
Shocks were replaced and there are no obvious loose parts, but the rear still feels vague over highway undulations. What alignment, bushing, tire or installati…
Car started pulling slightly right after a tire rotation. Alignment printout is technically in spec. Is it worth cross-rotating tires to check radial pull befo…
2024 Ford F-150 Lariat 3.5 EcoBoost, about 31,000 miles. Shocks were replaced and there are no obvious loose parts, but the rear still feels vague over highway…
There is a single clunk from the front over small potholes and driveway edges. Big smooth bumps don't reproduce it. End links look intact. Any good way to isol…
2019 Volkswagen Atlas SEL, about 76,000 miles. Shocks were replaced and there are no obvious loose parts, but the rear still feels vague over highway undulatio…
Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressures match. Would you cross-rotate tires to check radial pu…
2013 Infiniti G37 xS, about 90,000 miles. Alignment printout is within spec, but the car still wants to drift right on a flat road.
2024 Toyota Tacoma TRD Off-Road, about 26,000 miles. Shocks were replaced and there are no obvious loose parts, but the rear still feels vague over highway und…
Alignment printout is within spec, but the car still wants to drift right on a flat road. Tire pressures match.
1968 Ford Mustang Fastback, about 151,000 miles. Car started pulling slightly right after a tire rotation. Alignment printout is technically in spec. Is it wor…